UL ELECTRODEVICES PVT. LTD.

+91 20 2696 0000 |corporate@ulepl.com |

Profibus COM-Module

Profibus COM-Module

Specifications

  • Dimensions (LxWxH): 85 x 65 x 12 mm
  • Power supply: 3.3 V
  • Low power consumption
  • CDI interface (config, debug, status)
  • Parameter change during operation
  • Integrated LEDs on the circuit board
  • Fieldbus plug as DSUB 9
  • Modules are PNO-certified and 100 % tested
  • One pin-out to the application
  • Freely configurable via a terminal and Modbus RTU
  • Galvanic separation (1.5 kV) of bus and application
  • Plug-in connector to the application ERNI SMC (32 pins)

Application Interface As Required Via:

  • SSC shift register interface (SPI)
  • Automatic shift register recognition
  • Automatic Baud rate recognition
  • SDI Modbus interface to the application
  • RS485, RS232, UART
  • Dual port RAM interface

Environmental Conditions

  • Operating temperature: 0°C to +60°C
  • Storage temperature: -30°C to +85°C
  • Humidity: 0% to 95%, non-condensing
  • Condensing: not allowed
  • Mechanical shock load: 15G
  • Permanent mechanical stress: 5G

Corporate Office

Nirman Classic,
III Floor, S. No. 36,
Katraj - Kondhwa Road,
Pune - 411046.

Phone No.: +91 20 2696 0000
Fax No.: +91 20 2696 2079
Email : corporate@ulepl.com

Locations

Connect with us

Top