UL ELECTRODEVICES PVT. LTD.

+91 20 2696 0000 |corporate@ulepl.com |

Industrial Networking







Dual LC Regeneration TAP:

  • Our Regeneration Fiber TAPs can copy the traffic from one segment and then send it to multiple network analyzing tools.
  • The Dual LC Regeneration TAP is an efficient and performant tool that can help monitor your fiber network.
  • It’s a type of fiber network TAP that splits the signal once, before duplicating and regenerating the monitor signal twice.
  • The two output signals can therefore be connected to two separate monitoring systems, to be filtered and analyzed in different ways.
  • The Dual LC Regeneration TAP is a Fiber Optic TAP suited for the monitoring of a single fiber optic link by two different analyzers.
  • It uses LC connectors with low insertion loss zirconia sleeve adapters, and is available in Single-Mode (1310nm 9/125µm) and Multi-Mode (850nm 50/125µm).
  • The Regeneration TAP only splits the signal once, before duplicating and regenerating the monitor signal twice.
  • This greatly mitigates the weakening of the optical signal that results from excessive splitting.





Quad LC Regeneration TAP:

  • Our Quad LC Regeneration TAP is a Fiber TAP ideal for monitoring of a single fiber optic link by four different analyzers.
  • This Quad LC Regeneration TAP is a Fiber network TAP specially created for monitoring a single fiber link by four different analyzers.
  • An innovative tool, this fiber tap can mitigate the weakening of the optical signal that can result from an excessive splitting.
  • All four output signals can be connected to four separate monitoring systems, to be filtered and analyzed in different ways.
  • The Quad LC Regeneration TAP is a Fiber Optic TAP suited for the monitoring of a single fiber optic link by four different analyzers.
  • It uses LC connectors with low insertion loss zirconia sleeve adapters, and is available in Single-Mode (1310nm 9/125µm) and Multi-Mode (850nm 50/125µm).
  • The Regeneration TAP only splits the signal once, before duplicating and regenerating the monitor signal four times.
  • This greatly mitigates the weakening of the optical signal that results from excessive splitting.





Dual Output Gigabit Copper TAP:

  • Our Regeneration Copper TAPs can copy the traffic from one segment and then send it to multiple network analyzing tools.
  • Our Gigabit Copper TAP is an efficient tool entirely created for duplicating traffic from one in-line link to up to two monitoring systems.
  • This kind of TAP device is useful when setting up more than one monitoring system on a single link.
  • Our signature Gigabit Ethernet TAPs are comprehensive solutions for monitoring your 10/100/1000BaseT networks.
  • Gigabit Network TAPs seamlessly duplicate full-duplex network traffic for greater performance and security.
  • They do that by providing monitoring devices with an accurate copy of the traffic without having no impact on your network.
  • Gigabit Ethernet TAPs seamlessly duplicate full-duplex 10/100/1000 Mbps traffic at wire speed.
  • They provide monitoring devices with an accurate copy of the traffic with no impact on the network.

Gigabit Copper Port Replicator:

  • Designed for optimizing your mirrored port (SPAN) usage, it provides full monitoring of your Ethernet network.
  • The Gigabit Port Replicator copies traffic from 1 x 10/100/1000 mirrored or SPAN port, to 4 x 10/100/1000 outputs.
  • The use of port mirroring can have a negative effect on a switch’s performance, greatly limiting the number of monitoring ports available on this kind of devices.
  • By providing up to 4 analyzers with an exact copy of the traffic, the Gigabit Port Replicator enables greater analysis potential, while requiring only one output from the source appliance.
  • The Gigabit Port Replicator copies traffic from 1 x 10/100/1000 mirrored or SPAN port, to 4 x 10/100/1000 outputs.
  • By providing up to 4 analyzers with an exact copy of the traffic, the Gigabit Port Replicator enables greater analysis potential, while requiring only one output from the source appliance.
  • The Gigabit Port Replicator seamlessly duplicates 100% of the traffic it receives, ensuring total visibility over the data stream to be analyzed.

Corporate Office

Nirman Classic,
III Floor, S. No. 36,
Katraj - Kondhwa Road,
Pune - 411046.

Phone No.: +91 20 2696 0000
Fax No.: +91 20 2696 2079
Email : corporate@ulepl.com

Locations

Connect with us

Top