+91 20 2696 0000 |corporate@ulepl.com |

PLC/DCS Specific Interfacing Modules

Analog Output Redundant Interface module with channel to channel 3- way isolation

AO Redundant Field Interface Modules with option of fuse & fuse fail indication in each path used to interface between PLC/DCS Analog Outputs to field or field devices. Protection against short circuit is provided in each channel through fuse.

Component Specification
Fuse Link: 20mm Glass fuse (Fuse Base-Vertical/Horizontal).
Terminals*: Screw type suitable for 2.5Sq.mm conductor.
PCB: Glass Epoxy double side PTH with Lacquer coating.

Technical Specification

General Data

No. of Channel: 4, 8, 16.
Test Voltage: 500V, 50Hz, 1Min between each channel.
Ambient operating Temp. : Max 60° C.
Relative Humidity: Max 90% (Non- Condensing).
Tropicalisation: Lacquer coating on PCB.
Identification Tag: Provided.
Mounting: Universal Din Rail Mountable.
Standard/Approvals: PCB: Type tested STQC, IEC 61373, ANSI IPC 2221 & 2222, MIL 275B.
Terminals: UL/CE & CSA Standard.
Relays: UL/CSA.

Input & Output Data

System Signal (Input): 4-20mA / 0-20mA.
Field Signal (Output): 4-20mA / 0-20mA.
Protection: Fuse provided in each path.
Type of connection: 2-Wire differential.
Indication / Channel: Not applicable.
Termination on Field side: Screw type terminals.
Termination on System side: Two Plug-in Type Connectors.
Isolation: 3 ways.

Other Notes

Screw less Terminals: Available on request for selective Modules.

Side View

Corporate Office

Nirman Classic,
III Floor, S. No. 36,
Katraj - Kondhwa Road,
Pune : 411046.

Phone No.: +91 20 2696 0000
Fax No.: +91 20 2696 2079
Email : corporate@ulepl.com


Connect with us