Passive Interface Modules
Interface Module - Elco/Idec to Terminals
Passive Interface Modules are used to convert the Conventional wiring into Modular Wiring. Module is used to convert EDAC connector to the screw type terminal block. The Diagonal position of the EDAC connector means that the wire leading out of the cable housing at the side can be led away without restricting neighboring modules.
Plug-in type: Connector EDAC male/female Available in 38, 56, 90 Position.
Terminals*: Screw type suitable for 2.5Sq.mm conductor.
PCB: Glass Epoxy double side PTH with Lacquer Coating.
No. of Positions: 38, 56, 90.
Test Voltage: 500V between each channel.
Ambient operating Temp. : Max 80° C.
Relative Humidity: Max 90% (Non- Condensing).
Tropicalisation: Lacquer coating on PCB.
Identification Tag: Provided.
Mounting: Universal Din Rail Mountable.
Standard/Approvals: PCB: Type tested STQC, IEC 61373, ANSI IPC 2221 & 2222, MIL 275B.
Terminals: UL/CE & CSA Standard.
Input Side Termination: Connector EDAC male/female
Output side Termination: Screw Type
Max Operating Voltage: Max 60VDC
Input Current / Channel: 1Amp
Protection: Available on request
Indication / Channel: Available on request*
Screw less Terminals: Available on request for Selective modules.