All in One, Universal IIoT H/w RevPi Connect+ Now Available in 8/16/32 GB
- Article No.: 100302 (8 GB version)
- Article No.: 100303 (16 GB version)
- Article No.: 100304 (32 GB version)
RevPi Connect+

The RevPi Connect+ allows the user maximum freedom of design during the implementation of IIoT projects due to the open platform concept (e. g. complete root rights).
Two Ethernet sockets enable the device to be simultaneously connected to the automation network and IT network, for example, to transmit machine data from the shop floor to the cloud or a higher-level IT system.
The device is powered by the Raspberry Pi Compute Module 3+, which means quad-core power with 1.2GHz and 1GB RAM as well as up to 32GB of storage. As interfaces, the RevPi Connect+ has two Ethernet sockets, two USB sockets, one micro HDMI socket and one micro USB socket.
As an operating system, the device has a customized version of Raspbian incl. a RT patch.
Ready for dispatch 2-3 working days + shipping time depending on destination.
Two Ethernet sockets enable the device to be simultaneously connected to the automation network and IT network, for example, to transmit machine data from the shop floor to the cloud or a higher-level IT system.
The device is powered by the Raspberry Pi Compute Module 3+, which means quad-core power with 1.2GHz and 1GB RAM as well as up to 32GB of storage. As interfaces, the RevPi Connect+ has two Ethernet sockets, two USB sockets, one micro HDMI socket and one micro USB socket.
As an operating system, the device has a customized version of Raspbian incl. a RT patch.
Ready for dispatch 2-3 working days + shipping time depending on destination.
Technical Data
Housing dimensions (H x W x D) | 96 x 45 x 110.5 mm |
Housing type | DIN rail housing (for DIN rail version EN 50022) |
Housing material | Polycarbonate |
Weight | approx. 197 g / 224 g (incl. connectors) |
IP Code | IP20 |
Item no. | RPC+ |
Power supply | 12-24 V DC -15% / +20%, reverse-polarity protected |
Max. power consumption | 20 Watt (incl. 1 A total USB output current) 1 |
Operating temperature | -40 °C....+55 °C |
Storage temperature | -40 °C....+85 °C |
Humidity (at 40°C) | 93% (non-condensing) |
Interfaces | 2 x USB A (Total current draw from both sockets max. 1 A)2 2 x RJ45 10/100 Ethernet (using separate MAC addresses) 1 x RS485 screw-type terminal (not galvanically isolated) 1 x Micro-USB (solely for image transfer to eMMC) 1 x Micro HDMI 1 x PiBridge system bus 1 x ConBridge system bus |
Connectors | 1 x 4-pole screw-type terminal for relay contact and signal input 1 x 8-pole spring clamp connector for power supply |
Processor | Broadcom BCM2837B0 quad-core ARM Cortex A53 |
Clock rate | 1.2 GHz |
Processor cooling | Passive with heat sink |
RAM | 1 GB |
Flash memory | 8 GB (Article No.: 100302) 16 GB (Article No.: 100303) 32 GB (Article No.: 100304) |
Number of digital input channels | 1 |
Input type | 24 V control voltage (e.g. for power-good signal of a UPS) |
Input thresholds | approx. 3.0V (0 -> 1) / 2.3V (1 -> 0) |
Input protection | against overvoltage, negative voltages |
Number of digital output channels | 1 |
Output type | Relay contact, approval up to 30 V switching voltage (e.g. for power supply of a router) |
Maximum current load of the contact | 2A @ 30V DC (resistive load!) |
Software integration of input and output | Via GPIOs and process image. Output is optionally switched by hardware watchdog |
Hardware watchdog functionality | Can be disabled by bridging the 8-pin connector. Reset by toggling a GPIO or alternatively a bit in the process image |
Hardware watchdog intervall | Trigger after approx. 60 seconds without toggling the reset bit |
Compatible modules for system expansion | All RevPi IO modules and RevPi Gate modules can be connected via the PiBridge system bus. Various transceiver modules can be connected via the ConBridge system bus |
ESD protection | 4 kV / 8 kV (according to EN61131-2 and IEC 61000-6-2) |
EMI tests | Passed (according to EN61131-2 and IEC 61000-6-2) |
Surge/Burst tests | Passed (according to EN61131-2 and IEC 61000-6-2) |
Buffer time RTC | min. 24 h |
Optical indicator | 6 status LEDs (bi-color), two of them freely programmable |
RoHS conformity | Yes |
CE conformity | Yes |