PLC/DCS Specific Interfacing Modules
Analog Input Field Interface Module with fuse & surge protection having 2/4 wire selection
AI Field Interface Modules with option of fuse & MOV for surge protection in each Channel and provision of selection of 2-Wire / 4-Wire using DIP switches used for interfacing PLC/DCS Analog Inputs with field or field devices such as 2/4wire current transmitters etc.
Fuse Link: 20mm Glass fuse, 100mA (Fuse Base-Vertical/Horizontal).
Terminals*: Screw type suitable for 2.5Sq.mm conductor.
PCB: Glass Epoxy double side PTH with Lacquer coating.
No. of Channel: 8, 12, 16.
Test Voltage: 500V, 50Hz, 1Min between each channel.
Ambient operating Temp. : Max 60° C.
Relative Humidity: Max 90% (Non- Condensing).
Tropicalisation: Lacquer coating on PCB.
Identification Tag: Provided.
Mounting: Universal Din Rail Mountable.
Standard/Approvals: PCB: Type tested STQC, IEC 61373, ANSI IPC 2221 & 2222, MIL 275B.
Terminals: UL/CE & CSA Standard.
Field Signal (Input): 4-20mA from 2-Wire / 4-Wire Transmitter.
System Signal (Output): 4-20mA / 1-5V / 0-10V.
Protection: MOV & Fuse provided in each path.
Type of connection: 2-Wire / 4-Wire selection of each channel using DIP Switch.
Termination on Field side: Screw type terminals.
Termination on System side: Plug-in Type Connector.
3-Way Isolation: Available on request for selective module.
Screw less Terminals: Available on request for selective Modules.