Panel Accessories Modules

Diode Oring Module for SMPS Redundancy
Application
Diode Oring Modules are used when Two SMPS are connected in Parallel (Redundancy), available in 10 Amp / 20 Amp /40 Amp/ 70 Amp. The PIV of Diodes are 1200V.
Component Specification
One Incoming & two Outgoing Terminals for connection of front & rear Tube light.
One Incoming & two outgoing terminal for connection of front & rear fan.
Two Spare Terminals to take IN & OUT.
Technical Specification
General Data
Operating Voltage: Available in 24VDC.
Ambient operating Temp. : Max 60° C.
Relative Humidity: Max 90% (Non- Condensing).
Tropicalisation: Lacquer coating on PCB.
Identification Tag: Provided.
Mounting: Universal Din Rail Mountable.
Standard/Approvals : PCB: Type tested STQC, IEC 61373, ANSI IPC 2221 & 2222, MIL 275B
Terminals: UL/CE & CSA Standard
Other notes
Screw less Terminals: Available on request for selective Modules.
Ordering Type with Dimensions:
ULPEDDIO-10AMP, 66 X 92 mm
ULPEDDIO-20AMP, 66 X 92 mm
ULPEDDIO-40AMP, 158 X 126 mm
ULPEDDIO-70AMP, 225 X 126 mm