+91 20 2696 0000 corporate@ulepl.com   

UL Automation Systems Pvt. Ltd.

+91 20 2696 0000 | corporate@ulepl.com |

UL Automation Systems Pvt. Ltd.

Customized Cable harness & PCB Assembly

Pulse Generator

Application
The Pulse Generator with optical isolation is designed for checking of 16 SOE Digital Inputs of PLC. Here the output ‘ON’ time can be selected using DIP switch.

Component Specification
Terminals*: Screw type suitable for 2.5Sq.mm conductor.
PCB: Glass Epoxy double side PTH with Lacquer Coating.

Technical Specification

General Data

No. of Channels: 16.
Ambient operating Temp. : Max 60° C.
Relative Humidity: Max 90% (Non- Condensing).
Tropicalisation: Lacquer coating on PCB.
Identification Tag: Provided.
Mounting: Universal Din Rail Mountable.
Standard/Approvals : PCB: Type tested STQC, IEC 61373, ANSI IPC 2221 & 2222, MIL 275B
Terminals: UL/CE & CSA Standard
Relays: UL/CSA

Input Output Data

Input Voltage: 24VDC.
Microcontroller: 89C52 with 12 MHz Crystal.
Output side Configuration: Sink Type (Low going Pulse).
Output Time on selection: Using DIP Slide switch.
Termination on Output Side: 37 Pin D-Sub male Connector.

Top